How To Light Pilot Light On Gas Fireplace Insert




How To Light Pilot Light On Gas Fireplace Insert. The pilot position on a gas fireplace is the position on the fireplace controls that is used to start the pilot flame. While pressing down the control knob in the pilot position, press the ignition switch.

Gas Fireplace Pilot Light Won T Go Out Lighting Ideas from decorlighting.port-media.org

Push in knob (this releases the gas to the pilot area only). If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. Push the igniter button once every second until it lights.

Table of Contents

It May Take A Few Tries To Get The Fireplace To Ignite.

This can be an indication that your fireplace thermocouple is either bad or worn out.to light gas logs safely, turn the control handle to the pilot position, press it in, light the pilot with a match and hold down the handle for half a minute until the pilots are burning on their own.ventless gas fireplaces, in particular, are popular because they’re clean and easy to use. Likewise, how do you light a pilot light on a gas fireplace? Natural gas appliances and fireplaces have traditionally used a standing pilot light to ignite the flame/heat source.

Next, Light Your Lighter And Put Its Flame Near The Pilot Light Inside The Fireplace Or Furnace, Or Press The Clicker Button To Make Sure That It Is Sparking (This May Be Hard To See In Some Fireplaces).Now Press The Knob, Or A Button Near The Knob, To Get Gas Flowing To The Pilot Light.often, This Will Involve Manually Depressing The Pilot Valve And Using An Electric Ignitor Or.

From off position, turn gas control knob (reads off, on & pilot) counterclockwise to pilot position. However, if you’re new to owning a gas fireplace, you may be wondering what a pilot light is. Newer generations of gas fireplaces and appliances use an electronic ignition system.

If Gas Is Coming Out Of The Pilot, But It Still Won't Light, The Spark Igniter Could Be The Problem.

Once the pilot is lit, you can leave the fireplace pilot on and turn the fireplace on and off at the switch, remote or other application. Push the igniter button once every second until it lights. Once you insert the key, do not turn it until after preparing your lighter, otherwise you may release a dangerous amount of gas into the room.

See also  Hallmark Movie Socks Target

Depending On How Long It’s Been Since The Gas Fireplace Was Last Used, Ignition May Take Several Attempts Before Igniting.

Ignite the pilot light : The pilot light can stay lit without heating up the appliance or causing any damage. Once you insert the key , do not turn it until after preparing your lighter, otherwise you may release a dangerous amount of gas into the room.

To Ignite Your Device's Pilot Light, You'll Need To Insert A Fireplace Key Into The Gas Valve Knob Located To The Left Or Right Of The Fireplace.

While pressing down the control knob in the pilot position, press the ignition switch. Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube. The next very important step in how to light a gas fireplace is to light the pilot light.

Tags:

Leave a Reply

Your email address will not be published.

Related Post